What Problems Should You Pay Attention To When Maintaining The Electronic Tensile Test Machine?

Regarding the problems that need to be paid attention to in the daily maintenance of the tensile testing machine, the Cable Detection Equipment Manufacturer tells us to pay attention to the following points: the maintenance and maintenance of the tensile testing machine is very important, and the working state of the tensile machine is directly related to the accuracy and maintenance.

1 Do not use the machine without the test machine to avoid accidents.

2 It is necessary to study and discuss the instrument operation manual before use.

3 The parts of the Electronic Tensile Test Machine should be kept clean. After cleaning the surface without painting, wipe it with gauze with a small amount of oil to prevent rust, especially during the dry season. If you don't need it, you need to use a cloth cover to enter the dust-proof soil, especially the gear guide wheel, oil, etc., pay attention to dust.

4 During the experiment, unrelated objects should not be placed on the tension machine to avoid injury and damage to the instrument during vibration.

5 When all parts on the test machine (such as jaws, indenters, pendulums, etc.) are not in use, they should be coated with anti-rust oil and placed in a dry place.

6 Can the blade on the pendulum be placed on the knife holder, and the top of the force measuring piston can be placed in the steel bowl, and the small belt on the force measuring piston can be normal.

7 If there is oil leakage, it is necessary to reflect on where the oil leakage of the test machine is. Whether the local screw cap, especially the nut of the oil pipe joint, can be tightened.

8 After each experiment, do not let the task piston fall to the bottom of the cylinder, leave a 20mm interval for reuse next time, and avoid air entering the oil passage.

9 The testing machine should be certified once a year by the authorized institutions authorized by the statutory body, and should not be used out of date.